Cleaning And Storage - Cleanmaxx SLX225C Gebrauchsanleitung

EN
Short nozzle:
Use the short nozzle to remove dirt and small quantities of liquid on smooth
surfaces.
4. Switch on the device using the On / Off switch. The device will start vacuuming
immediately.
5. Move the device over the area which is to be cleaned.
6. Switch off the device using the On / Off switch after you have fi nished vacuum
cleaning.

Cleaning and Storage

CAUTION!
• Make sure that the device is switched off before cleaning it.
• Never immerse the motor housing or charger in water or other liquids.
• The device must not be connected to the charger during cleaning of the
collecting container.
• Never use soap or other cleaning products for cleaning the dust fi lter. This
would cause damage to the fi lter.
• Only reassemble the device once all of the parts are completely dry!
• Do not use any corrosive or abrasive cleaning agents to clean the housing.
They could damage the surfaces. If necessary, clean the housing using a
slightly damp, soft cloth.
Emptying the Collecting Container and Cleaning the Filter
1. Hold the device fi rmly by the handle and keep it as horizontal as possible.
4. Empty the collecting container into a rubbish bin. Tap the fi lter out over the
rubbish bin.
20
2. Press the release button and remove the collecting
container.
3. Remove the dust fi lter from the collecting container.