Herunterladen Inhalt Inhalt Diese Seite drucken

Ordering Replacement Parts; Cleaning And Storage - Cleanmaxx SM102B Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

If you want to remove the adapter from the base unit, press on the adapter's unlatching
lever and remove it from the base unit.
26
7. Slowly move the attachment backwards and forwards over the surface to be cleaned and
press the steam activator as required. Hold the attachment for approximately 10 seconds
over areas which need to be cleaned especially thoroughly.
8. When the water tank is empty and steam is no longer being produced, switch the appli-
ance off, pull the plug out of the plug socket and wait until the appliance has cooled down.
Then remove the water tank and refi ll it with water (see chapter "Use", section "Filling
the water tank").
9. If the cleaning process has fi nished and the appliance has completely cooled down, remove
the water tank, empty it and let it dry.
10. Before using the appliance again, the water tank should always be checked for any residual
water and, if necessary, completely emptied.

Ordering Replacement Parts

You can obtain original spare parts and accessories via our website
www.service-shopping.com.

Cleaning and storage

CAUTION!
❐ Pull the plug out of the plug socket before cleaning.
❐ Never immerse the appliance in water and do not rinse it under running water.
❐ Do not use solvents or abrasive cleaning agents.
❐ The safety of the appliance can only be guaranteed when it is regularly checked for damage
and wear and tear.
❐ Do not use any corrosive or abrasive cleaning agents for cleaning. These could damage
the surface.
When necessary, wipe the appliance with a damp cloth and possibly some mild cleaning
agent.
Remove any dirt from the attachments (hairs, fl uff etc.)
02626_DE-GB-FR-NL_V0.indb 25
02626_DE-GB-FR-NL_V0.indb 25
5. Move the on/off switch (17) on the back of the appliance to
position 1. The indicator lamp (9) on the front of the appli-
17
ance lights up and the appliance heats up.
6. When the appliance has reached its operating temperature,
steam is emitted by pressing the handle of the steam activa-
tor (26). You can now start cleaning.
25
26.10.12 07:30
26.10.12 07:30

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis