Danger Of Fire; Correct Connection; Proper Use - Cleanmaxx WE-803-C Gebrauchsanleitung

Danger of Fire

❐ Do not use the device if there are flammable gases present in the air.

correct connection

❐ Only ever connect the device to a properly installed plug socket. The plug socket must also
be readily accessible after connection. The mains voltage must match the technical data for
the device (see the "Technical Data" chapter). Use only proper extension cables whose
technical data matches that of the device.
❐ Make sure that the connected mains cable does not present a trip hazard.
❐ Position the cable in such a way that it does not become squashed or bent and does not
come into contact with hot surfaces.

Proper use

❐ Use the device only in enclosed spaces.
❐ Always check the device for damage before putting it into operation. If the device or the
charger show visible signs of damage, they must not be used. Do not try to repair the device
yourself or to replace any individual parts. In the event of any damage, contact our customer
service department.
❐ Do not use the device if it has malfunctioned, liquids or sharp foreign bodies (e. g. shards of
glass) have been sucked up or the device has been dropped. Have the device checked by a
specialist or contact the customer service department.
❐ In the event of damage / faults, switch the device off immediately.
❐ The device should only be used when it is fully and correctly assembled. The dust container
and filters must be inserted. The filter must not be damaged.
❐ Only use accessories which are recommended by the manufacturer.
❐ Make sure that you do not suck up any large, bulky objects with the device. They may
become jammed and block the flow of air; larger objects should be removed prior to vacuum
cleaning.
❐ Do not insert anything into the openings / nozzles of the device and make sure that these do
not become clogged.
❐ Never leave the device switched on when it is unsupervised.
❐ Switch off the device immediately
– if you stop working with the device,
– if you are no longer using the device,
– before you change the nozzles,
– if a fault or error occurs while the device is in operation,
– if foreign bodies have got into the device,
– before you clean parts of the device and accessories.
❐ Do not try to use the charger with another device or charge up the device using another
charger. Only ever use the charger which is supplied with this device.
08314_DE-GB-FR-NL_V0.indb 17
17
10.12.12 17:16