Selecting A Massage Program; Topping Up A Chip Card - Wellsystem Relax_Plus Gebrauchsanweisung

03/2011 1009864-00
4.6.1

Selecting a massage program

With chip card:
– Insert the chipcard.
– Press the START / STOP button.
Without a chip card:
– Press the program button.
– Use the plus or minus keys to select the program that you want to use
(e.g. Pr.02).
– Press the START / STOP button.
Variable settings such as the massage pressure can be entered during the
massage, see Page 26.
Chip card inserted incorrectly
If the chip card is inserted incorrectly, the error message Err is shown on the
display.
4.7

Topping up a chip card

The chip cards can be topped up for further massage sessions as often as
desired (see 'Presettings', page 35).
When topping up, the chipcards are upgraded to a new software version and
can no longer be used in devices in which older software is used.
Remaining credit
Upgraded chipcards briefly display the number of massages left after they
have been inserted. The operating screen is displayed afterwards.
Operation
Operating instructions – 23