Starting The Massage; Starting With A Chip Card - Wellsystem Relax_Plus Gebrauchsanweisung

Operation
20
Function
12 Circle button
13 Parallel button
14 Program button
15 Point button
16 Upper body button
17 Lumbar area button
18 Speed button (nozzle carriage)
19 Massage pressure button
4.3

Starting the massage

NOTE:
If and how the massage time can be selected depends on
the presettings – see page 34.
– Setting the massage time – see page 26.
– Lie down on the unit.
– Select the type of massage that you want and then press the START /
STOP button.
NOTE:
The zone or point massage selection only functions when
the nozzles are moving from the head end to the foot end.
If you have missed the right moment:
•
First select whole body massage again.
•
Wait until the nozzles reach the desired position while
moving from the head end.
•
Press zone or point massage.
NOTE:
The cooler in the base of the device is switched on and off
automatically whilst the device is being used.
4.3.1

Starting with a chip card

A set of 3 chip cards each loaded with an additional massage program is
available as an accessory – see page 22.
NOTE:
If and how the massage time can be selected depends on
the presettings – see page 34.
Information
Massage type
Massage type
Program selection
Massage area
Massage area
Massage area
Speed levels
min. 0.5, max. 3.75