03/2011
1009864-00
2.11.2
Packaging
All packaging consists of 100 % recyclable materials. Packaging brought into
circulation by the JK Corporate Group that is no longer required can be re-
turned to the JK Corporate Group. Your partner agency or dealer will be
happy to advise.
2.11.3
Disposal of old devices
The device has been manufactured using recyclable materials. The JK Corpo-
rate Group will provide you with information on the content or potential haz-
ards of the materials used.
The manufacturer is obliged to take back and dispose of certain electrical and
electronic components in accordance with the 2002/96/EU Directive.
The components and devices are labelled with the following symbol:
The device will, if requested, be properly disposed of by the JK Corporate
Group. This service is available free of charge. Your partner agency or dealer
will be happy to advise.
2.12
Guidelines
This device was built according to the following guidelines:
EC directive 'Electromagnetic Compatibility' 2004/108/EC (according to
the version valid at the time)
EC Machinery Directive 2006/42/EC (according to the version valid at the
time)
Low voltage directive 2006/95/EC (according to the version valid at the
time)
2.13
Export
We emphasize that these devices are intended for the European market only
and must not be exported to or operated in the USA or Canada! The manu-
facturer does not accept any liability in case of non-observance! It is emphati-
cally emphasized that non-compliance with this instruction may result in high
liability risks for the exporter and/or the operator.
2.14
Instruction signs on the device
See Appendix page 38.
2.15
Technical modifications
The device has been constructed in accordance with the current state-of-the-
art and the applicable safety regulations. The illustrations and specifications
on these instructions are subject to technical modifications which are required
in order to improve the device.
Information for the operator
Operating instructions – 11