Ribimex Ribiland PR4EN1T Bedienungs- Und Wartungsanleitung Seite 54

Fig.BC9
Fig.BC10
6.3- Before storage
1. Brushing off dirt form the machine, check damage or slack of each part.
If you find out abnormalities, have them repaired before the next use.
2. Extract fuel from the tank, and loose the drain screw of the float cabin to extract fuel, turn on the
engine, and leave it running until it stops naturally.
3. Remove the spark plug and put in 1-2cc of 2-cycle oil in the engine.
Draw the starter rope 2-3 times, set the plug back, and stop it at the contraction position.
4. Apply anti-rust oil to the metal parts such as the throttle wire, put the cover on the blade, and keep
it indoor avoiding dampness.