Ribimex Ribiland PR4EN1T Bedienungs- Und Wartungsanleitung Seite 48

BRUSH CUTTER & EDGE TRIMMER
I. Parts List
1. Air cleaner
2. Fuel tank
3. Clutch coupler system
4. Ignition switch
5. Throttle trigger
6. Hanger
7. Shoulder Strap
8. Handle B
9. Handle C
10. Outer pipe
11. Protector shield
12. Gear case
13. Blade or nylon wire
II. CHARACTERISTICS
Applied blade
Blade dimensions
Blade rotation direction
Cutting diameter
Dimensions
Dry weight
III. Special Safety Instructions
3.1- Warning labels on machine
3.2- Symbols on the machine
Metal blade / Nylon wire
Metal blade: 3-teeth blade ∅255mm
Nylon wire: 2x2.5mx2.55mm
Counterclockwise (from operator's view)
∅255mm
204x38x33cm
6.5 kg approx.
Read instructions manual before operating the product
Wear personal protective equipment: helmet, eye and ear protection.
Warning / Attention
Keep children, bystanders and helpers at 15m away from the product.
(a) The port to refuel the "mix gasoline". Position: fuel tank cap
(b) The direction to close the choke. Position: air cleaner cover
(c) The direction to open the choke. Position: air cleaner cover
Fig.BC1