Gaspardo RENATA MARISA Gebrauch Und Wartung Seite 92

ENGLISH
INTERVAL
EVERY SIX MONTHS
EVERY 400 HOURS
WORKING HOURS
EVERY PERIODICALLY
EVERY FIVE YEARS
REST PERIODS
It is in the interests of the user to follow these instructions carefully, as when work recommences, he will fi nd the equipment in perfect
condition.
92 - EN
USE AND MAINTENANCE
- Oil the height adjuster screw the depht wheels (3, Fig. 70).
- Change the speed change gear oil completely (Fig. 74) with SAE 90 type oil (Qty: Kg. 3).
- Check the pressure of the seed drill tyres (see «3.1 Technical Data»).
- To replace all the tubes of the hydraulic systems.
At the end of the season, or if a long period of rest is foreseen it is advisable to:
1) Wash the equipment thoroughly with water, especially the chemical substance hoppers,
then dry them. Clean the electrical components only with a dry cloth.
2) Carefully check for worn or damaged parts and replace then where required.
3) Check the state of wear of the transmission chains and toothed wheels. Replace damaged
or worn out parts, if required. Use solvent to clean the transmission chains, the toothed
wheels and the chain stretchers. Lubricate with mineral oil (SAE 80W/90) when dry.
4) Adjust the belt of the diffusion air pump and and replace it if necessary.
5) Firmly tighten all screws and bolts.
6) Apply protecting oil to all unpainted parts.
7) Protect the equipment with a (nylon) cover.
8) Then position it stably in a dry place out of the reach of unauthorized people
TYPE OF WORK
Oil Type: SAE 90
Quantity: Kg. 3
fi g. 74
cod. G19503482