Checking The Gearbox Transmission - Gaspardo RENATA MARISA Gebrauch Und Wartung

3.5.4 CHECKING THE GEARBOX TRANSMISSION

To check the correct coupling between the gears inside the gearbox,
proceed as follows:
- lift the machine off the ground, switch off the tractor engine, re-
move the ignition key and engage the parking brake;
- with one hand, turn the transmission wheel in the direction of
travel (Fig. 37);
- at the same time, with your other hand, grip the drive axle co-
ming out of the gearbox (F, Fig. 37) to exert a slight resistance to
the movement; make sure the axle is rotating together with the
transmission wheel;
- if the axle (F) does not turn in these conditions, the gearbox is
not set correctly; move levers A and B to engage the combination
chosen with the seed chart and repeat the check.
LONGITUDINAL SEEDING DISTANCE (Table 4)
The planting distances reporting in the table are only meant as a guide, as they depend on the different operating conditions of the soil.
Therefore, we recommend checking directly the actual distance between the seeds. It is recommended to do trial planting for a few metres
to check that seed deposition is taking place as desired, and especially check that the amount of seeds per linear meter corresponds to that
intended. The Manufacturer is not responsible for any inconsistencies between the values in the table and the actual values detected.
cod. G19503482
USE AND MAINTENANCE
fi g. 37
F
Ingran.
Gears Gearbox
10
23
Ingran.
Gears Gearbox
16
23
Tabella 4
Cambio
4 - 4 4 - 4
4 - 3 4 - 3
4 - 2 4 - 2
4 - 1 4 - 1
3 - 4 3 - 4
3 - 3 3 - 3
3 - 2 3 - 2
3 - 1 3 - 1
2 - 4 2 - 4
2 - 3 2 - 3
2 - 2 2 - 2
2 - 1 2 - 1
1 - 4 1 - 4
1 - 3 1 - 3
1 - 2 1 - 2
1 - 1 1 - 1
Cambio
4 - 4 4 - 4
4 - 3 4 - 3
4 - 2 4 - 2
4 - 1 4 - 1
3 - 4 3 - 4
3 - 3 3 - 3
3 - 2 3 - 2
3 - 1 3 - 1
2 - 4 2 - 4
2 - 3 2 - 3
2 - 2 2 - 2
2 - 1 2 - 1
1 - 4 1 - 4
1 - 3 1 - 3
1 - 2 1 - 2
1 - 1 1 - 1
ENGLISH
Cod. G19707504
EN - 77