Herunterladen Inhalt Inhalt Diese Seite drucken

Functional Description; Technical Data; Safety Instructions; Symbols And Icons - Parkside PTK 2000 C3 Originalbetriebsanleitung

Tischkreissäge
Vorschau ausblenden Andere Handbücher für PTK 2000 C3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Functional description

The table circular saw is used for cutting all types of wood lengt-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
with it.

Technical data

Bench circular saw...............................................................PTK 2000 C3
AC motor ......................................................... 230
Power ...................................................................2000 Watt
Operating mode ...................................................... S6 40%*
Safety class .....................................................................
Protection category.......................................................... IPX0
Idling speed .......................................................... 4800 min
Carbide saw blade ..............................ø 254 x ø 30 x 2,8 mm
Idling speed saw blade, n max. .............................. 7000 min
Number of teeth .........................................................24 / 48
Thickness riving knife ...................................................2,5 mm
min. Workpiece size WxLxH ............................... 10x50x1 mm
Table size ........................................................ 630 x 445 mm
Table width extender left/right ........................... 620 x 250 mm
Table length extender rear ................................. 435 x 320 mm
Cutting height max. 90° ................................................73 mm
Cutting height max. 45° ................................................63 mm
Height adjustment ................................................... 0 - 73 mm
Saw blade, swivelling ...................................................0 - 45°
Extraction connection .................................................ø 34 mm
Weight (including accessories),
........................................................................ approx 24 kg
Laser class ...........................................................................2
Laser wavelength ....................................................... 650 nm
Laser power ............................................................. < 1 mW
Laser module power supply
........................................................... 2 x 1,5 V Micro (AAA)
Sound pressure level
(L
) ..................................................93,7 dB(A); K
pA
Sound power level (L
)
WA
measured ......................................... 106,7 dB(A); K
guaranteed .........................................................108 dB(A)
* Operating mode S6 40%: Continuous operation with intermittent load
(cycle time 10 min). In order not to heat the motor more than permitted,
the motor may only be operated for 40% of the cycle time with the stated
nominal power and must then continue running for 60% of the cycle time
without a load.
Technical and optical changes may be undertaken in the course
of further development without notice. All dimensions, references
and information in this instruction manual are therefore not guar-
anteed. Legal claims made on the basis of the instruction manual
can therefore not be considered as valid.

Safety instructions

CAUTION! The following basic safety precautions must be ob-
served while using electric tools to protect against electric shock,
this electric tool and keep the safety instructions in a safe place.

Symbols and icons

Symbols on the appliance:

Carefully read these Operating Instructions.
Wear eye protection.
Wear ear protection.
V~
50Hz
Wear breathing protection.
Caution - Risk of injury.
II
Never reach into the running blade.
Do not expose the unit to rain. The device must not be
-1
wet, nor should it be operated in a moist
-1
Caution! - Laser radiation. Do not look into the beam.
Laser class 2
This label is attached to the saw blade guard.
108
Information of the acoustic power level L
Safety class II (Double Isolated)
Electrical appliances must not be disposed of with the
domestic waste.
= 3 dB
pA
Graphical symbol additionally on the saw
blades
= 3 dB
WA
Caution - a damaged blade must not be used under any
circumstances. Replace the saw blade immediately.

Symbols in the manual

Warning symbols with information on damage
and injury prevention.
Instruction symbols (the instruction is explained at the
place of the exclamation mark) with information on
preventing damage.
Help symbols with information on improving tool
handling.
Hazard symbol with information on the prevention of per-
sonal injury caused by electric shock..
Warning! Electric shock hazard.
Always unplug the device before working on it.
GB
MT
environment.
in dB.
WA
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis