Operating Mode; Manual Start / Switch Off; Water Level; Settings - Truma VeGA Gebrauchsanweisung

Operating mode

Information on operating the device
Betrieb
➀
12,0 V
➂
➁
20,0 A
Possible types of trend display.
Battery voltage increases, battery is charged.
The amount of power being drawn from the battery is
less than the output power of the VeGA.
Neutral. The amount of power being drawn from
the battery corresponds to the output power of
the VeGA.
Battery charge drops, battery is discharged.
The amount of power being drawn from the battery is
greater than the output power of the VeGA.

Manual start / switch off

Start device, switch off or switch to standby
mode manually.
VeGA manuell
VeGA starten VeGA starten
VeGA ausschalten VeGA ausschalten
If this menu is displayed, the
device is in „Standby".
– Available buttons
– „Start VeGA"
– „Switch off VeGA"
Confirm execution of selected function in another dialogue.

Water level

Display the current water level.
Wasserstand
The device has a closed water cycle and does not usually re-
quire additional water. However water loss can occur at high
ambient temperatures
A water shortage is visualised via a warning message on the
Touch Panel, only then is it necessary to top up the water. If
the water is not topped up, the device switches off after a
short time and a fault is displayed.
Only use deionised water.
The water container (max volume 3.5 l) has an overflow
where surplus water is drained, creating puddles be-
neath the vehicle.
= Battery voltage
= Charging current
= Battery voltage trend
display
VeGA manuell
VeGA in Stand-by VeGA in Stand-by
VeGA ausschalten VeGA ausschalten
If this menu is displayed, the
device is „Operational".
Available buttons
– „VeGA in standby"
– „Switch off VeGA"
The filling level is monitored
by the system.

Settings

Adjust system settings
Touch the button to change a setting.
Einstellungen
➀
➁
➂
Einstellungen
➁
➂
➃

Language

Sprachen
deutsch
english
francais

Sounds

If the function is activated a button sound is heard if the Touch
Panel is touched, and a warning sound is heard in the event of
messages.
Töne
➀
➁
An additional on the button indicates that the sound is
disabled.

Brightness

The brightness can be adjusted separately for „Active mode"
and „Sleep mode".
Helligkeit
➀ ➂ ➁
= darker
= brighter
= set value
„Settings" menu – part 1
= Language
= Sounds
= Brightness
Scroll through the list with
or .
„Settings" menu – part 2
= Sounds
= Brightness
= Battery type
Call up a list with languages for
menus, warnings, error mes-
sages and help messages.
Scroll through the list with
or .
Activate or deactivate button
sounds or warning sounds.
= Language
= Warning sound
Adjust the brightness of the
Touch Panel.
„Active mode"
„Sleep mode"
25