Yamaha YZ250F Fahrer- Und Wartungshandbuch Seite 39

Part number
YU-33975, 90890-01403
YM-01442, 90890-01442
YM-01494, 90890-01494
YU-3112-C, 90890-03112
YM-33277-A, 90890-03141 Timing light
YM-4019, 90890-04019
YM-91042, 90890-04086
YM-4111, 90890-04111
YM-4116, 90890-04116
YM-4112, 90890-04112
YM-4117, 90890-04117
Tool name/How to use
Steering nut wrench
This tool is used when tighten the steering ring nut to
specification.
Fork seal driver
This tool is used when install the fork oil seal.
Damper rod holder
Use this tool to remove and install the damper rod.
Pocket tester
Use this tool to inspect the coil resistance, output
voltage and amperage.
This tool is necessary for checking ignition timing.
Valve spring compressor
This tool is needed to remove and install the valve
assemblies.
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
Valve guide remover
Intake 4.0 mm (0.16 in)
Exhaust 4.5 mm (0.18 in)
This tool is needed to remove and install the valve
guide.
Valve guide installer
Intake 4.0 mm (0.16 in)
Exhaust 4.5 mm (0.18 in)
This tool is needed to install the valve guide.
SPECIAL TOOLS
YU-33975
YM-01442
YM-01494
YU-3112-C
YM-33277-A
YM-4019
YM-91042
YM-4111
YM-4116
YM-4112
YM-4117
1 - 8
GEN
INFO
Illustration
90890-01403
90890-01442
90890-01494
90890-03112
90890-03141
90890-04019
90890-04086
90890-04111
90890-04116
90890-04112
90890-04117