Yamaha YZ250F Fahrer- Und Wartungshandbuch Seite 368

OIL FILTER ELEMENT, WATER PUMP AND RIGHT
CRANKCASE COVER
REMOVAL POINTS
Impeller shaft
1. Remove:
Impeller 1
G
Washer 2
G
Impeller shaft 3
G
NOTE:
Hold the impeller shaft on its width across the
flats a with spanners, etc. and remove the
impeller.
EC4G3210
Oil seal
NOTE:
It is not necessary to disassemble the water
pump, unless there is an abnormality such as
excessive change in coolant level, discolora-
tion of coolant, or milky transmission oil.
1. Remove:
Bearing 1
G
2. Remove:
Oil seal 1
G
INSPECTION
Oil delivery pipe
1. Inspect:
Oil delivery pipe 1
G
Bend/damage → Replace.
Clogged → Blow.
4 - 58
ENG