Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PDOS 200 B2 Originalbetriebsanleitung

G B I E
Sound power level (L
measured ............. 93 dB(A); K
Vibration total value (a
* A break is introduced after 30 minutes of
uninterrupted operating duration until the de-
vice temperature differs 2 K (2°C) less than
room temperature.
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
assessment.
Warning! The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
usage conditions (all parts of the
operating cycle are to be consid-
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety Instructions

WARNING!
When using power tools, observe
the following basic safety measures
for the prevention of electric shocks
2 2
)
WA
= 3 dB
WA
) ......... 2.5 m/s
h
Please read all these instructions
before using the electric tools and
please keep the safety instructions.
2

Symbols and icons

Symbols in the manual:

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols with information
on preventing damage.
Connect the machine
to the power supply.
Pull out the mains plug.
Help symbols with information on
improving tool handling.
Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Risk of electric shock! Disconnect
from the mains before carrying out
maintenance and repair work.
Read the instruction manual.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Wear cut-resistant gloves.