Cover; Removal; Installation - ECOLAB ECOPLUS S series Betriebsanleitung

 Slide drain hose
tighten down on funnel [12].
 Slide funnel
 Insert connecting nipple
with the funnel casing [17].
WARNING
7.3

Cover

7.3.1

Removal

 Press button on right side
 Hold down button and pull cover to right until it
disconnects.
 Press button on left side
and disconnect at left side.
 Remove complete cover.
7.3.2

Installation

 Place cover onto rear panel from the front.
 Slide cover backwards as far as possible until both
buttons [18 r]
417102228_Ecoplus-S
[13] through housing from below and hand-
[12] back down into housing from above.
[7] up to the stop point until flush
Connecting nipple [7]
side ribs.
Do not bend the nipple or pull on or bend the
hose. Risk of breakage!
[18 r].
[18 l], pull cover forwards
& [18 l] (left and right) engage audibly.
- 40 -
Fig. 7.9
Fig. 7.10
must only be held by the
Fig. 7.11
Fig. 7.12
Rev 01-08.12