Care Instructions - Heyner capsula MN3X Bedienungsanleitung

English
Important:
Make sure that the belt of the three-point belt is not twisted or jammed.
Please follow strictly the drawings and installation instructions. If you have any questions,
please contact your dealer, the importer or the manufacturer.
2.3 Installation / Positioning c
apsula
3
Put the onto the car seat in driving direction.
®
capsula MN
Now put your child in the child car seat.
®
capsula
Figure 34-35
Depending on the size of your child now run the shoulder belt of the car through the
appropriate belt guide slot G II (Fig. 34).
To ensure optimum belt run, the shoulder belt should run in the middle of the shoulder.
Figure 36
Now run the lap belt (W) with buckle tongue (V) through the belt guide hole (J) and click the
buckle tongue (V) from three-point belt of the car into the three-point belt buckle with an
audible << click >> .
Please make sure that the belt is not twisted!
Important:
Make sure that the belt of the three-point belt is not twisted or jammed. Please follow strictly
the drawings and installation instructions. If you have any questions,
please contact your dealer, the importer or the manufacturer.
c -capsula.com
13
3
®
MN

3. Care instructions

To wash the cover of your To wash the cover of your
®
capsula MN
by using the positioning handle (PG), which is under the central adjusting belt (G5),
in the furthest reclined position (lying position).
Figure 15-15a
• Release the safety lock (SR) of the safety bolt (SB) on the top of the back of the base
(BT) and pull the safety bolt (SB) sideways out of the base holes (BL). Now the seat
part (ST) is unlocked and can be clapped forward.
Figure 33
• Release the belt ends of the harness belt (G2) on the back of the seat part (ST) from
the belt anchor (R) and pull out the two ends of the belts through the shoulder belt
guides (G1).
• Then unhook the shoulder pad belts (SG) from the connecting hook (VH).
Figure 37
• The cover can now easily be removed through the crotch strap and washed at
30 ° C. Belts and buckle must not be washed.
Warning:
Please do not dash. Do not tumble dry. When upholstering the
look again after the right anchoring of the harness belt (G2) in the belt anchor (R) as
well as the shoulder pad belts (SG) in the connecting hook (VH). Secure the right run of
all belts. If you feel insecure, take some photos BEFORE removing the parts.
c -capsula.com
English
3 3
push the seat part (ST)
®
X / capsula MN
child car seats
®
capsula
GB
14