Herunterladen Inhalt Inhalt Diese Seite drucken

The Child In The Capsula - Heyner capsula MN3X Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

  • DEUTSCH, seite 1
English
1.5. The child in the
®
capsula
MN
1.5.1. Securing the child (Fig. 24-26)
Figure 24-24a
• Loosen the shoulder belts by pressing the belt adjuster (GM) and pull the harness belts
(G2) toward you.
Figure 25-26
• Open the buckle (D) and the harness (G), put the harness belts (G2) to the left and
right of the pages. Now put the child in the seat of the
so that the bottom is deep in the seat.
Figure 27
• Put the two buckle tongues (C) of the harness belt (G2) together and connect them
with the buckle (D) until a clear << click >> is audible. By pulling on the central
adjusting belt (G5) make sure that the harness belts touch the child fi rmly and are not
twisted.
1.5.2 Sitting and reclining positions of the child
(Fig. 28)
• The
child car seats are equipped with a 4-stage adjustment feature.
®
capsula
• The operation is quick and easy with just one hand.
• By pushing the positioning handle (PG) up the seat part (ST) will be brought into the
desired position for your child. For longer trips orthopedic surgeons recommend a
lying position if possible.
c
-capsula.com
9
3
X
child car seats
®
capsula
1.6. Release of ISOFIX and Top Tether / expansion
Fig. 29-32)
Figure 29
• Push the seat part (ST) in the sitting position by pressing the positioning handle (PG),
which is under the central adjusting belt (G5).
Figure 30
• Release the Top Tether (TT) and remove it from the fastening point of the car.
Put the Top Tether (TT) over the child car seat.
• Press the child car seat a little into the car seat, then turn the ISOFIX fi xing lever (IE)
slightly upward (Fig. 10) to loosen the ISOFIX terminals (IK).
Figure 31
• Now pull the entire seat forward until the ISOFIX terminals are fully extended and you
will see the green markings.
Figure 32
• Now you can press the ISOFIX release buttons (IT) on the ISOFIX terminals (IK) to loosen
them from the ISOFIX anchors (IA).
• Pull the
child car seats forward and press again the ISOFIX fi xing lever (IE)
®
capsula
(Fig. 10) to push the two ISOFIX terminals (IK) again into the base (BT) of the seat.
c
-capsula.com
English
3
®
capsula
MN
X
GB
10

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Capsula mn3

Inhaltsverzeichnis