Care Instructions - Heyner MultiFix AERO Bedienanleitung

English
Between the straps and the body of the child may only fi t
a fl at hand.
Customize the belt height adjuster in the vehicle to the
size of the child
and size of the child car seat.
Check the path of the belts and the headrest height from
time to time and adapt them to your growing child.
Please follow the instruction drawings and assembly details carefully.
If you have any questions, please contact your dealer, the importer
or the manufacturer.

3. Care instructions

Release the belt ends of the harness belt (G2) on the back of the seat (ST) from
the belt anchor (R) and pull out the two ends of the belts
through the shoulder belt path (G1).
Then unhook the shoulder straps (SG) from the connecting hook (VH).
Loosen the belt ends of the harness strap (G2) on the back of the seat (ST) from
the belt anchor (R). Now you can remove the harness straps (G2) and the loosen
the shoulder straps (SG) from the adjustment device and pull out the two strap
ends through the shoulder belt path (G1).
39
Unhook the shoulder straps (SG)
out of the connection hook (VH).
To remove the buckle belt, slide the
strap along with the Metal plate
from bottom to top out of the seat
part.
The cover can now easily
be removed through the crotch
strap and washed at 30 °C.
Belts and buckle must
not be washed.
Warning:
Please do not spin. Do not tumble
dry.
When covering the HEYNER® child
car seat check that the anchoring of
the harness straps (G2) is secured
correctly in the belt anchor (R) as
well as the shoulder straps in the
connection hook (VH). Ensure that
all straps are in the correct position.
If you are unsure, take some photos
BEFORE removing the parts.
English
Press
40