Attaching, Detaching And Emptying The Dust Collector; Care And Maintenance - Cocraft HSD240 Original Bedienungsanleitung

Sanding
1. Set the desired speed using the speed dial (1).
2. Hold the sander firmly in both hands.
3. Move the sander back and forth, parallel with the grain of the wood.

Attaching, detaching and emptying the dust collector

Attaching the dust collector
1. Twist the collector slightly anticlockwise
and slide it into the attachment coupling.
2. Twist the collector clockwise until it
locks into place.
Detaching the dust collector
Twist the collector anticlockwise and pull
it from the attachment coupling and shake
out any debris when necessary.

Care and maintenance

1. Unplug the sander from the wall socket
before cleaning.
2. Vacuum the sander after using it to
keep it clean.
3. Remove the dust collector and pull
out the filter (see fig.). Vacuum both
the filter and collector.
4. Refit the filter in the collector and
close it.
5. Refit the dust collector onto the sander.
Storage
Unplug the sander and store it out of reach of children if it is not to be used for any
significant period.
7