Care And Maintenance - Cocraft HRD 380 Bedienungsanleitung

Sanding
1. Set the desired speed using the speed selector (1).
2. Hold the sander securely with both hands.
Attaching, detaching and emptying the dust collector
Attaching
1. Twist the collector slightly anti-clockwise and
slide it into the attachment coupling.
2. Twist the collector clockwise until it locks
into place.
Detaching
Twist the collector anticlockwise and pull it from
the attachment coupling and shake out any
debris when necessary.

Care and maintenance

1. Unplug the sander from the wall socket
before cleaning.
2. Vacuum the orbital sander regularly and after
using it to keep it clean.
3. Open the dust collector and pull out the filter
(see fig.). Vacuum both the filter and collector.
4. Refit the filter in the collector and close it.
5. Refit the dust collector onto the sander.
Storage
Unplug the sander and store it out of reach of
children if it is not to be used for any significant
period.
7