Straight Matting Connector M8; Mating Connector M8 Bus Terminator - Siko AP05 Originalmontageanleitung

AP05
Accessory connector

8.2 Straight matting connector M8

Advice
NOTICE
` Strand cross sections of lines 0.14 ... 0.25 mm² / cable feed-through:
• Accessory SIKO art. no. "84209" (female 4 pin bus IN).
• Accessory SIKO art. no. "84210" (pin 4 pin bus OUT).
Mounting
1. Slide parts
2. Strip the cable.
3. Shorten, expand the shielding and lay around the shielding ring
4. Run strands through coupling sleeve
5. Mount parts
6. Thread insulating sleeve
7. Screw coupling sleeve
Fig. 10: Straight matting connector M8

8.3 Mating connector M8 bus terminator

For the fieldbus to function, a terminating resistor is required (120 Ohm).
• Accessory SIKO art. no. "BAS-0005" (pin 4 pin).
For multiple position indicators on one bus: connect terminating plug to
bus OUT of the last bus station (see chapter 4.2).
For one position indicator: connect terminating plug to bus OUT (see chap-
ter 4.2).
AP05 · Date 25.09.2018 · Art. No. 88847 · Mod. status 316/18
ø3.5 ... ø5 mm.
(Fig. 10)
... over cable sheath.
1 4
...
2 4
sleeve.
.
1
5
6
7
and strip them.
5
. Turn pressure screw
, solder strands and mount insulating
6
with element
5 7
1
2
3
4
English
to secure the cable.
1
and tighten pressure screw
35
.
4