Siko AP05 Originalmontageanleitung Seite 30

AP05
30 Commissioning
Fig. 8: Operating elements
Manual setup operation
After applying supply voltage (see chapter 4.2), the position indicator will
be on the uppermost level of the menu structure (default/delivery state).
• Pressing the key enables or disables the incremental measurement
function.
• Pressing the key starts calibration (see User manual).
• Pressing the key starts the configuration mode (see User manual).
LED Position monitoring
In the basic state (factory setting), the LED display has the following
meaning.
Color State
both LED on
green
off
one LED on
red
both LED off
red
AP05 · Date 25.09.2018 · Art. No. 88847 · Mod. status 316/18
1
2
1
Description
Actual position value is within the programmed
position window.
Actual position value is outside the programmed
position window.
Actual position value is outside the programmed
position window. The red LED indicates the direc-
tion of shaft rotation required to arrive at the set-
point.
Actual position value is within the programmed
position window.
English
Position monitoring LEDs
1
Bus-LEDs
2