Transport, Storage, Maintenance And Disposal; Accessory Connector; Straight Mating Connector M12 - Siko MSAC501 Originalmontageanleitung

MSAC501

Transport, Storage, Maintenance and Disposal

8 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store the magnetic sensor with care. Pay attention
to the following points:
• Transport and / or store the magnetic sensor in the unopened origi-
• Protect the magnetic sensor from harmful physical influences includ-
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the magnetic sensor for transport dam-
Maintenance
With correct installation according to chapter
requires no maintenance. Clean the surface of the magnetic tape with soft
cloth from time to time if it is very dirty.
Disposal
The magnetic sensor's electronic components contain materials that are
harmful for the environment and are carriers of recyclable materials at the
same time. Therefore, the magnetic sensor must be recycled after it has
been taken out of operation ultimately. Observe the environment protec-
tion guidelines of your country.

9 Accessory connector

(not included in the scope of delivery)

9.1 Straight mating connector M12

Advice
NOTICE
` Strand cross sections of lines max. 0.25 mm² / cable feed-through: ø6
• Accessory SIKO art. no. "85277" M12 A coded (socket contact 12 pin).
Mounting
1. Mount seal to shielding ring
2. Slip parts
MSAC501 · Date 30.04.2018 · Art. No. 88113 · Mod. status 167/18
nal packaging.
ing dust, heat and humidity.
ages. Do not install damaged magnetic sensors.
- ø8 mm.
(Fig. 3)
... over outer cable.
1 6
4
the magnetic sensor
.
4
English 25