Commissioning; Transport, Storage, Maintenance And Disposal - Siko GS04 Originalmontageanleitung

GS04
16

Commissioning

5 Commissioning
Alignment travel
Aligment travel is required (see mounting instructions of the position
indicator).

6 Transport, Storage, Maintenance and Disposal

Transport and storage
Handle, transport and store sensors with care. Pay attention to the fol-
lowing points:
• Transport and/or store sensors in the unopened original packaging.
• Protect sensors from harmful physical influences including dust, heat
and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the sensor for transport damages. Do not
install damaged sensors.
Maintenance
With correct installation according to chapter
maintenance. The sensor has received lifetime lubrication and need not be
lubricated under normal operating conditions.
Disposal
The sensor's electronic components contain materials that are harmful for
the environment and are carriers of recyclable materials at the same time.
Therefore, the sensor must be recycled after it has been taken out of ope-
ration ultimately. Observe the environment protection guidelines of your
country.
GS04 · Date 15.04.2015 · Art. No. 86318 · Mod. status 154/15
English
4 the sensor requires no