Documentation; Safety Information; Intended Use - Siko MSAC501 Originalmontageanleitung

MSAC501

Documentation

1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
• The mounting instructions describe the mechanical and electrical
• The software description for commissioning.
These documents can also be downloaded at
com/p/msac501".

2 Safety information

2.1 Intended use

The sensor collects the absolute angle information of the coded MRAC501
magnetic ring or of the MBAC501 magnetic tape, respectively. A superordi-
nate control unit can read the absolute position value (configurable with 4
different resolutions) via the encoder interface. An incremental interface
with quadrature signals and 4 different resolutions is available as an addi-
tional option. Via an external input (Config), the sensor can be switched
over to another operating mode (service mode); encoder parameters can
be changed and status information recalled in this mode.
In the service mode set via the "Config" external input, the data interface
(D+, D-) functions in the bidirectional RS485 mode. Using a RS485/RS232
protocol converter, the sensor can be connected to a PC and parameter-
ized according to the predefined set of commands via any terminal pro-
gram.
On the sensor's upper side, there is a two-colour LED for diagnostic pur-
poses, which permits the indication of error and other states.
1. Observe all safety instructions contained herein.
2. Read all documents provided on the CD.
3. Arbitrary modifications and changes to this actuator are forbidden.
4. Observe the prescribed operating and installation conditions.
5. Operate the actuator exclusively within the scope of technical data
MSAC501 · Date 30.04.2018 · Art. No. 88113 · Mod. status 167/18
assignments, the accessories and the order key.
installation including all safety-relevant requirements and the associ-
ated technical specifications.
and the specified limits (see chapter 10).
English
"http://www.siko-global.
17