MSAC501
Identification
2.4 Basic safety information
Danger of explosion
DANGER
` Do not use the magnetic sensor in explosive zones.
Movable parts
WARNING
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
` Prevent people from access by installing protective facilities.
External magnetic fields
CAUTION
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g.
4 Installation
4.1 Mechanical mounting
Magnetic sensor failure
CAUTION
` When mounting pay attention to the IP type of protection (see chap-
` Avoid impact on the device.
` Do not open the sensor yourself.
` Cable must be provided with strain relief. If necessary use drag chain
Loss of measured values
NOTICE
` The tolerance and gap measures be observed over the whole measur-
MSAC501 · Date 30.04.2018 · Art. No. 88113 · Mod. status 167/18
-
MSAC501
0023
version number
type of unit
ter 10).
or portective sleeve.
ing length.
English
19