Commissioning; Transport, Storage, Maintenance And Disposal - Siko IMS360 Montageanleitung

IMS360
20

Commissioning

NOTICE
For mating connector accessories see chapter 7.
PIN Designation
1 CAN_SHLD
2 +UB
3 GND
4 CAN_H
5 CAN_L
5 Commissioning
Please refer to our homepage (see chapter 1) for the description of
CANopen and SAE J1939.

6 Transport, Storage, Maintenance and Disposal

Transport and storage
Handle, transport and store inclinometer with care. Pay attention to the
following points:
• Transport and / or store inclinometer in the unopened original pack-
aging.
• Protect inclinometer from harmful physical influences including dust,
heat and humidity.
• Do not damage connections through mechanical or thermal impact.
• Prior to installation inspect the inclinometer for transport damages.
Do not install damaged inclinometer.
Maintenance
With correct installation according to chapter
no maintenance.
Disposal
The inclinometer's electronic components contain materials that are
harmful to the environment and are carriers of recyclable materials at the
same time. Therefore, the inclinometer must be recycled after it has been
taken out of operation ultimately. Observe the environment protection
guidelines of your country.
IMS360 · Date 04.04.2023 · Art. No. 91019 · Mod. status 56/23
English
Bus IN
2
5
3
1
4
viewing side = plug-in side
4
the inclinometer requires