Target Group; Basic Safety Information - Siko GS04 Originalmontageanleitung

GS04
12 Safety information
NOTICE
WARNING
DANGER
WARNING
Important operating information that may facilitate operation or cause
unplanned device reactions if disregarded including possible property
damage.
Signal signs

2.3 Target group

Installation instructions are intended for the configuration, commissi-
oning and mounting personnel of plant or machine manufacturers. This
group needs profound knowledge of an sensor's necessary connections
and its integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery, downstream electronic unit or sensor.
` Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
` This personnel must be able to recognize danger that might arise from
mechanical, electrical or electronic equipment.
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
• are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.

2.4 Basic safety information

Danger of explosion
` Do not use the sensor in explosive zones.
Rotating parts
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any rotating parts as for example clamping ring, torque
support or hollow shaft.
` Prevent people from access by installing protective facilities.
GS04 · Date 15.04.2015 · Art. No. 86318 · Mod. status 154/15
English