Target Group; Basic Safety Information - Siko IKM360R Originalmontageanleitung

IKM360R
Safety information
Danger that may cause minor injury, property damage or unplanned device
CAUTION
reactions if you disregard the instructions given.
Important operating information that may facilitate operation or many
NOTICE
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions and User manual are intended for the configura-
tion, commissioning and mounting personnel of plant or machine manu-
facturers who possess special expertise in drive technology. This group of
operators needs profound knowledge of an inclinometer necessary con-
nections and its integration into a complete machinery.
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or inclinometer.
` Configuration, commissioning, mounting and maintenance by trained
` These personnel must be able to recognize dangers that might arise
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

2.4 Basic safety information

Danger of explosion
DANGER
` Do not use the inclinometer in explosive zones.
Danger to man or machine
DANGER
Danger to man or machine or damage to plant equipment caused by failure
or malfunctioning of the inclinometer's.
` Provide suitable safety installations including protective equipment or
` Put the machine out of operation and protect it against unintended
IKM360R · Date 21.01.2021 · Art. No. 90437 · Mod. status 222/20
expert personnel only.
from mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
limit switches.
starting.
English 15