Target Group; Basic Safety Information - Siko IH5828 Originalmontageanleitung

IH5828
Safety information
Important operating information that may facilitate operation or many
NOTICE
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions is intended for the configuration, commissioning
and mounting personnel of plant or machine manufacturers who possess
special expertise in drive technology. This group of operators needs pro-
found knowledge of a incremental encoder necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or incremental encoder.
` Configuration, commissioning, mounting and maintenance by trained
` This personnel must be able to recognize dangers that might arise
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

2.4 Basic safety information

Danger of explosion
DANGER
` Do not use the incremental encoder in explosive zones.
Danger to man or machine
DANGER
Danger to man or machine or damage to plant equipment caused by failure
or malfunctioning of the incremental encoder.
` Provide suitable safety installations including protective equipment or
` Put the machine out of operation and protect it against unintended
IH5828 · Date 20.10.2020 · Art. No. 89304 · Mod. status 239/20
expert personnel only.
from mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
limit switches.
starting.
English 15