Target Group; Basic Safety Information - Siko IMS360 Montageanleitung

IMS360
16 Safety information
CAUTION
NOTICE
WARNING
DANGER
DANGER
Danger that may cause minor injury, property damage or unplanned device
reactions if you disregard the instructions given.
Important operating information that may facilitate operation or many
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions and User manual are intended for the configura-
tion, commissioning and mounting personnel of plant or machine manu-
facturers who possess special expertise in drive technology. This group of
operators needs profound knowledge of an inclinometer necessary con-
nections and its integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or inclinometer.
` Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
` These personnel must be able to recognize dangers that might arise
from mechanical, electrical or electronic equipment.
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
• are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.

2.4 Basic safety information

Danger of explosion
` Do not use the inclinometer in explosive zones.
Danger to man or machine
Danger to man or machine or damage to plant equipment caused by failure
or malfunctioning of the inclinometer's.
` Provide suitable safety installations including protective equipment or
limit switches.
` Put the machine out of operation and protect it against unintended
starting.
IMS360 · Date 04.04.2023 · Art. No. 91019 · Mod. status 56/23
English