Target Group; Basic Safety Information - Siko LE200 Originalmontageanleitung

LE200
Safety information
Important operating information that may facilitate operation or many
NOTICE
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols

2.3 Target group

Installation instructions are intended for the configuration, commission-
ing and mounting personnel of plant or machine manufacturers who pos-
sess special expertise in drive technology. This group of operators needs
profound knowledge of a magnetic sensor necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
WARNING
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or magnetic sensor.
` Configuration, commissioning, mounting and maintenance by trained
` This personnel must be able to recognize dangers that might arise
Qualified personnel are persons who
• are familiar with the safety guidelines of the electrical and automation
• are authorized to commission, earth and label circuits and devices/

2.4 Basic safety information

Danger of explosion
DANGER
` Do not use the magnetic sensor in explosive zones.
Movable parts
WARNING
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
` Install protective facilities to prevent people from getting access.
LE200 · Date 15.01.2020 · Art. No. 84882 · Mod. status 7/20
expert personnel only.
from mechanical, electrical or electronic equipment.
technologies when performing configuration tasks;
systems in accordance with the safety standards.
English 17