General Power Tool Safety Warnings - Parkside PASSK 20-Li A1 Originalbetriebsanleitung

Use only the following battery to operate the
cordless tool: PAP 20 A2
Type:
Rated voltage:
Capacity:
Cells:
Use only the following high-speed battery
charger to charge the cordless tool: PLG 20 A2
INPUT:
Rated voltage:
Rated power consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745 . The A­rated noise level of the
power tool is typically:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Vibration emission value:
Total vibration values (vector total of three direc­
tions) determined in accordance with EN 60745:
Tightening screws and nuts of maximum permis­
sible size:
a = 8 .65 m/s
2
h
Uncertainty K = 1 .5 m/s
Wear hearing protection!
PASSK 20-Li A1
LITHIUM ION
(DC)
20 V
3 Ah
10
230–240 V ~ , 50 Hz
(AC)
85 W
3 .15 A T3.15A
(DC)
21 .5 V
3 .5 A
approx . 60 min
II / (double insulation)
L = 91 .6 dB (A)
PA
K = 3 dB
PA
L = 102 .6 dB (A)
WA
K = 3 dB
WA
2
NOTE
► The vibration level specified in these instruc­
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons . The
specified vibration emission value can also
be used to make an initial exposure estimate .
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions in
some cases . Regular use of the power tool in
this way may cause the user to underestimate
the vibration . Try to keep the vibration loads
as low as possible . Measures to reduce the
vibration load are, e .g . wearing gloves and
limiting the working time . Wherein all states of
operation must be included (e .g . times when
the power tool is switched off and times where
the power tool is switched on but running
without load) .
General power
tool safety warnings
WARNING!
► Read all safety warnings and all instructions .
Failure to follow the warnings and instructions
may result in electric shock, fire and/or seri­
ous injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains­operated (corded) power tool or battery­
operated (cordless) power tool .
GB │ MT │ 15 ■