Clock Functions - JUNO JB131D8 Benutzerinformation

10
Setting the heating function
1. Turn on the oven with
The display shows the set temperature,
the symbol and the number of the heating
function.
2. Press or
function.
3. Press or the oven starts
automatically after 5 seconds.
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.
Changing the temperature
Press or to change the
temperature in steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
Checking the temperature
You can check the current temperature in
the oven when the function or programme
works.
1. Press .

CLOCK FUNCTIONS

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
SET+GO
MINUTE MINDER
.
to set a heating
Application
To show or change the time of day. You can change the
time of day only when the oven is on.
To set how long the oven works.
To set when the oven turns off.
To combine DURATION and END function.
To turn on the oven with necessary settings with only one
press of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MIND‐
ER at any time and also when the oven is off.
The display shows the temperature in the
oven.
2. Press or the display shows again
the set temperature automatically after
5 seconds.
Fast heat up
Do not put food in the oven
when the Fast heat up
operates.
The Fast heat up is available only for
some oven functions. If Faulty tone is
turned on in the settings menu, the signal
sounds if the Fast heat up is not available
for the set function. Refer to "Additional
functions" chapter, Using the settings
menu.
The Fast heat up decreases the heat up
time.
To turn on the Fast heat up press and
hold for more than 3 seconds.
If the Fast heat up is turned on the display
shows: flashing horizontal bars
.
and