Herunterladen Inhalt Inhalt Diese Seite drucken

Clock Functions - JUNO JB121D0 Benutzerinformation

Vorschau ausblenden Andere Handbücher für JB121D0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

in the settings menu, the signal sounds if the
Fast Heat Up is not available for the set
function. Refer to "Additional functions"
chapter, Using the settings menu.
The Fast Heat Up decreases the heat up
time.

8. CLOCK FUNCTIONS

8.1 Clock functions table
Clock function
Time of Day
Duration
End Time
Time Delay
Set + Go
Minute Minder
00:00
Count Up Timer
8.2 How to set: Time of Day
After the first connection to the mains, wait
until the display shows
flashes.
1. Press
or
2. Press
.
3. Press
or
4. Press
.
The display shows the new time.
To change the time of day press
and again until
starts to flash.
8.3 How to set: Duration
1. Set a heating function and temperature.
44
ENGLISH
Application
To show or change the time of day. You can change the time of day
only when the oven is on.
To set how long the oven works.
To set when the oven turns off.
To combine Duration and End Time function.
To turn on the oven with necessary settings with only one press of
the sensor field any time later.
To set a countdown time. This function has no effect on the opera‐
tion of the oven. You can set the Minute Minder at any time and also
when the oven is off.
To set the count up, which shows how long the oven works. It is on
immediately when the oven starts to heat. The Count Up Timer is
not turned on if Duration and End Time are set. This function has no
effect on the operation of the oven.
and 12:00. "12"
to set the hours.
to set the minutes.
again
To turn on the Fast Heat Up press and hold
for more than 3 seconds.
If the Fast Heat Up is turned on the display
shows flashing bars.
2. Press
again and again until
to flash.
3. Press
or
Duration.
4. Press
or the Duration starts
automatically after 5 seconds.
5. Press
or
Duration.
6. Press
or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal sounds for
2 minutes. The display shows flashing
time setting. The oven turns off.
7. Press a sensor field to stop the signal.
8. Turn off the oven.
starts
to set the minutes for
to set the hours for
and

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis