Clock Functions - JUNO JH084C1 Benutzerinformation

12
interrupted and the oven operates with the
highest energy efficiency possible.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For

CLOCK FUNCTIONS

Clock functions
Clock function
Time of Day
Duration
Minute Minder
How to set: Clock functions
How to change: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut
or when the timer is not set.
Step 1
- press repeatedly.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
- press repeatedly to change the time of day.
How to set: Duration
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
Application
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the opera‐
tion of the oven. You can set this function at any time, also
when the oven is off.
- starts to flash.
- press to set the time.
- starts to flash.
- press to set the duration.
.
general energy saving recommendations
refer to "Energy Efficiency" chapter,
Energy Saving.
- starts to flash.