Automatic Programmes - JUNO JB131D8 Benutzerinformation

12
When the Time delay function
is activated, the display shows
a static symbol of the oven
function,
The dot shows which clock
function is on in the Clock /
residual heat display.
Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a programme)
and temperature.
2. Set the DURATION.
3. Touch again and again until
flashes in the display.
4. Touch to set the SET+GO function.
The display shows
indicator. This indicator shows which clock
function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
Setting the MINUTE MINDER
1. Touch .

AUTOMATIC PROGRAMMES

WARNING! Refer to Safety
chapters.
There are 20 automatic programmes. Use
an automatic programme or recipe when
you do not have the knowledge or
experience on how to prepare a dish. The
display shows the default cooking times
for all automatic programmes.
Automatic programmes
Programme name
1 ROAST BEEF
2 ROAST PORK
3 ROAST VEAL
with a dot and .
and with an
and "00" flash in the display.
2. Use to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use or to set the MINUTE
MINDER and
4. Touch or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00 and
flash in the display.
5. Touch a sensor field to stop the
acoustic signal.
COUNT UP TIMER
1. To reset the Count Up Timer press:
again and again until display shows
flashing .
2. Press and hold:
shows "00:00" the Count Up Timer
starts to count up again.
Programme name
4 ROAST LAMB
5 ROAST GAME
6 CHICKEN, WHOLE
7 WHOLE FISH
8 PIZZA
9 QUICHE LORRAINE
10 LEMON SPONGE CAKE
11 CHEESE CAKE
12 ROLLS
13 FARMER BREAD
to confirm.
. When the display