Clock Functions - JUNO JB094C7 Benutzerinformation

Buttons
Button

CLOCK FUNCTIONS

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
Setting and changing the time
You must set the time before you operate
the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer is
not set.
Press the or to set the correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
and again until starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until
starts to flash.
All manuals and user guides at all-guides.com
Function
MINUS
CLOCK
PLUS
Application
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the oper-
ation of the appliance.
again
Description
To set the time.
To set a clock function.
To set the time.
3. Press or to set the DURATION
time.
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to the
off position.
Setting the END
1. Set an oven function and temperature.
2. Press again and again until
to flash.
3. Press or to set the time.
The display shows
.
flashes and an
starts
.
9