Battery - Viking MR 4082 Gebrauchsanleitung

● Remove the ignition key and keep it in a
safe place.
● Remove the steering column cover.
( 13.15)
Checking the fuses
Plug-in fuses:
Remove the plug-in fuses (1). By visual
inspection, check whether the wire (2) in
the plastic is damaged (burnt through).
Replace the fuse if the wire (2) is
damaged.
0478 193 9901 A - EN
Main fuse:
Open the cover (1).
By visual inspection, check whether wire
(2) is damaged (blown). If the wire is
damaged, fuse (3) must be replaced by a
specialist dealer.
VIKING recommends VIKING specialist
dealers.
● Close the cover.
● Install the steering column cover.
( 13.16)
Replacing the fuses
● Remove the steering column cover.
( 13.15)
Plug-in fuses:
● Check the plug-in fuses.
10 Ampere fuse (red)
15 Ampere fuse (blue)
Model Charging device Electrics
MR 4082 10 A
MR 4082 K 15 A
Main fuse:
150 Ampere
For safety reasons, the main fuse must
only be replaced by a specialist dealer.
VIKING recommends VIKING specialist
dealers.
● Install the steering column cover.
( 13.16)

13.18 Battery

Risk of injury:
When disconnecting the battery,
always remove the black negative
(–) cable first and only then, the red
positive (+) cable.
When connecting the battery,
always connect the red positive (+)
cable first.
The battery is maintenance free
and must only be replaced if it is
damaged and must be removed in
the case of prolonged
immobilisation (e.g. winter break).
Remove battery before disposing of
the machine.
Do not dispose of the battery with
domestic waste, but hand it in to a
specialist dealer or at a hazardous
waste collection point.
● Stop the engine.(
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
● Remove the steering column cover.
( 13.15)
10 A
10 A
11.3)
8.9)
113