Cleaning The Machine; Combustion Engine - Viking MR 4082 Gebrauchsanleitung

Open the retaining clasp (1) Remove the
battery (2).
● Close the retaining clasp.
● Install the steering column cover.
( 13.16)
Inserting the battery
● Remove the steering column cover.
( 13.15)
Insert the battery (1). Close the retaining
clasp (2).
0478 193 9901 A - EN
● Connect the battery. ( 13.18)
● Install the steering column cover.
( 13.16)
Charging the battery:
Risk of injury:
In order to charge the battery using
another charging system, the
battery must be removed.
Furthermore, the specifications on
the battery supplementary sheet
and on the charger must be
observed.
● Stop the engine. ( 11.3)
● Remove the ignition key and keep it in a
safe place.
● Disconnect the battery. (
● Remove the battery. ( 13.18)
The battery can be charged using a
suitable charging system; the instructions
in the battery supplementary sheet must
be observed.

13.19 Cleaning the machine

Avoid damage to the machine.
Never spray water (high pressure
cleaner) onto engine components,
seals, electrical components
(battery, wiring harness etc.) and
bearing points. This may result in
damage and expensive repairs.
Always remove the mowing deck
for cleaning and maintenance
operations.
Do not use aggressive cleaning agents.
These cleaners can damage plastics and
metals, impairing the safe operation of
your VIKING machine.
If you are unable to remove the dirt with
water using a brush or a cloth, VIKING
recommends the use of a special cleaner
(e.g. STIHL special cleaner).
● Stop the engine. (
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
● Remove the mowing deck. (
● First, remove accumulated clipping
deposits in the mowing deck housing
using a stick.
● Clean the underside of the mowing
deck with water and a brush.
● Clean the discharge chute using
running water and a brush when
13.18)
removed and well away from the
machine.
● Remove grass residues from the
mowing deck and engine compartment.
● Clean the mowing blade with water and
a brush.
● Remove the grass catcher box clean
using running water and a brush well
away from the machine. (

13.20 Combustion engine

Observe the operating and maintenance
instructions contained in the attached
engine instruction manual.
To achieve a long service life, it is always
particularly important to maintain a
sufficient level of oil and to change the
engine oil and air filter regularly.
11.3)
8.9)
12.1)
11.9)
115