Operating On Slopes Guide - Viking MR 4082 Gebrauchsanleitung

Maximum coupling load = 40 kg
Maximum pulled load = 40 kg
A pulled load of 40 kg at the trailer
coupling is achieved when pulling a
trailer with a weight of 250 kg on a
level surface.
11.11 Operating on slopes
Warning:
Before operating the machine on
slopes, the section "For your
safety" and especially "Instructions
for safe operation" must be
carefully read and observed.(
For safety reasons, the machine
must not be used on slopes with an
incline of more than 10° (17.6%).
A slope inclination of 17.6%
corresponds to a vertical height
increase of 17.6 cm for a 100 cm
horizontal distance. In order to
ensure an adequate lubrication of
the engine, the information in the
accompanying engine instruction
manual must be additionally
observed when using the machine
on slopes.
Check the braking function before
operating the mower on slopes.
94
The following points must be noted:
– Slopes must be driven on in a
longitudinal direction. Driving
transversely increases the danger of
tipping over.
– Changes of direction on slopes should
be avoided.
– If changes of direction cannot be
avoided, they must be executed with
particular care.
11.12 Guide
Note
The accuracy of the guide depends
on the body size of the user and on
the adjustment of the driver's seat.
In order to prevent uncut grass being left
between several mowing strips, the
machine is equipped with a guide.
● The user sits on the driver seat.
4.)
When the guide (1) is positioned precisely
at the mowing edge (transition from
already mown lawn to unmown lawn) as
seen from the driver's seat, the lawn is cut
with an overlap (A) of approx. 5 cm.
This overlap ensures that the mowing
blades cut approx. 5 cm into the already
cut mowing strip. This ensures that no
uncut grass is left between the two mowing
strips.
0478 193 9901 A - EN