Builder's Plate; Maximum Recommended Number Of Persons - buster MAGNUM PRO Handbuch

Design categories:
Specifications for design category C:
Category C: The craft has been designed for voyages where conditions up to
and including wind force 6 (Beaufort scale) may be experienced (a wind force
of approximately 14 metres per second, a significant wave height of 2 metres
or more with a temporary peak wave height of 4 metres). These conditions may
be experienced during voyages on large lakes, estuaries and coastal waters in
moderate weather conditions.
Specifications for design category D:
Category D: The craft has been designed for voyages where conditions up to
and including wind force 4 (Beaufort scale) may be experienced (a wind force
of approximately 8 metres per second, a maximum significant wave height of
0.3 metres with a temporary peak wave height of 0.5 metres). These conditions may
be experienced inshore and in coastal waters in fair weather conditions.
NB
Principal dimensions and capacities:
Boat dimensions including length, beam, draught, gross weight and fuel tank
capacity are specified in Appendix 1 (Technical specifications).

Builder's plate:

Mounted near the steering console, the builder's plate contains some of the
information specified above. Detailed information that supplements the information
provided on the plate is given in the relevant sections of this manual.

5.3 Maximum recommended number of persons

Maximum recommended number of persons (crew plus passengers):
Type
Buster Magnum Pro
Buster Magnum
Buster Cabin
Buster XXL
Buster XL
Buster XL Pro
Buster X
Buster Lx
Buster Lx Pro
Buster L
Buster M
Buster S / Scc
Buster XS / XSr
Buster Mini
Seating diagrams are presented in Figure 1.
Significant wave height refers to an average wave height based
on the highest one-third of the waves, corresponding roughly
to the wave height observed by an experienced mariner. The
height of individual waves may be two times the significant
wave height.
Seating capacity
6
8
7
7
7
7
7
6
6
6
5
4
4
3
9 (32)