Replacing The Double Feed Prevention Roller - Xerox DocuMate 4790 Benutzerhandbuch

5. Insert the right side of the roller module into the scanner, then carefully angle the left of the roller module
into the scanner. Be careful while inserting the roller module as the gears will engage as you place the
module in the scanner.
6. Gently lift and hold the roller module in the scanner and then rotate the locking arm up and into the scanner.
Make sure the roller module is securely in place before closing the scanner.

Replacing the Double Feed Prevention Roller

1. Pull up on the double feed prevention roller cover and remove it from the scanner. Set the cover aside and
make sure nothing is set on the cover as it will break.
Scanner Options, Maintenance and Troubleshooting
Xerox ®
9-157
DocuMate ® 4790
User's Guide