Klein + Hummel 0810 Bedienungsanleitung Seite 18

Klein + Hummel
Simultaneous connection of 5.1 and 2.0 signals to the 7.1 High Definition Bass Manager™
An interconnection example for digital signals is shown below. Note that the subwoofer-to-loudspeaker
interconnections are analog so digital inputs are not required on the main loudspeakers.
Digital connections to the 7.1 High Definition Bass Manager™
To increase the number of subwoofers in a system to make a Plane Wave Bass Array™, the subwoofers should be
set up as shown below. Analog or digital input cards can be used. The subwoofers should be calibrated for their
in-room response (see Acoustical Controls and Calibration section). The LFE channel should be connected to the
first subwoofer only so that the reproduction level (at 0 or +10 dB) is consistent with the main channels.
Operating Manual O 810 / O 870 English 16