4. CONTROLS AND INSTRUMENTS
4.9.2 - 3
4.10 - 11
4.1
4.2
4.3
4.1
4.8
4.1 STEERING WHEEL
Turns the front wheels.
4.2
EN
12
4.2 CHOKE CONTROL (if fitted)
This enriches the mixture so must
only be used for the time necessary
when starting from cold.
4.3 ACCELERATOR LEVER
4.31
Regulates the engine's r.p.m. The positions are indicated on a
4.32
plate showing the following symbols:
4.6
4.33
4.7
4.4
4.5
– The «CHOKE» position (if fitted instead of the 4.2 control)
4.12
enriches the mixture so must only be used for the time nec-
4.34
essary when starting from cold.
– When moving from one area to another, put the lever in a
4.9.1
position between «SLOW» and «FAST».
– When cutting, go to the «FAST» position.
4.4 KEY IGNITION SWITCH
4.4
«CHOKE» (if fitted) for starting
from cold
4.3
«SLOW» for minimum engine
speed
«FAST» for maximum engine
speed
This key operated control has three
positions:
«OFF» everything is switched off;
«ON» activates all parts;
«START» engages the starter
motor.