Controls And Instruments; Steering Wheel - GGP ITALY 102 Gebrauchsanweisung

4. CONTROLS AND INSTRUMENTS

4.2
a b
4.3
4.8
4.4
4.10

4.1 STEERING WHEEL

Turns the front wheels.
4.2 CHOKE CONTROL (if fitted)
This enriches the mixture so must only be used for the time nec-
essary when starting from cold.
4.7
c d e f g h
4.1
4.9
A
B
4.11
4.5
A
B
4.3 ACCELERATOR LEVER
4.6
Regulates the engine's r.p.m. The positions are indicated on a
plate showing the following symbols:
«CHOKE»
«SLOW»
«FAST»
– The «CHOKE» position (if fitted instead of the 4.2 control) en-
riches the mixture so must only be used for the time necessary
when starting from cold.
– When moving from one area to another, put the lever in a po-
sition between «SLOW» and «FAST».
– When cutting, go to the «FAST» position.
4.4 KEY IGNITION SWITCH
This key operated control has three positions:
«OFF»
«ON»
«START»
(if fitted) for starting from cold
for minimum engine speed
for maximum engine speed
everything is switched off;
activates all parts;
engages the starter motor.
EN 13