Chapter 7. Ordinary Maintenance; Instructions For Ordinary Maintenance Work; Sealing Blade Cleaning; Machine Cleaning - Minipack-Torre Media Matic Installations-, Gebrauchs- Und Wartungsanleitung

Chapter 7. Ordinary maintenance

7.1. Instructions for ordinary maintenance work

ORDINARY MAINTENANCE MUST BE CARRIED OUT BY QUALIFIED, APPROPRIATELY TRAINED STAFF.
Before carrying out maintenance, switch the machine off with the main ON/OFF switch, disconnect
it and wait for the machine to cool down!

7.2. Sealing blade cleaning

Using a dry cloth, wipe any film residues off the sealing
blade: do this at once after sealing since they are easier to
remove when still warm.
For improved cleaning, regularly lubricate the sealing
blade with the Teflon non-stick grease supplied with the
machine.

7.3. Machine cleaning

Use a cloth moistened with water to clean the machine.
If the machine works in a dusty environment it is
necessary to clean it more frequently inside as well as
outside.
We especially recommend you vacuum up the dust which
settles on the interior electrical components.

7.4. Plastic film and other scrap removal

It is very important to periodically clean the tunnel inside
so to remove all scraps.
Wait for the tunnel to cool down properly
before cleaning it!
When the reel on the automatic rewinder (11) is full,
remove the film by unscrewing the knob (17) and taking
away the disk (16).
27
EN