Registered Trademarks; Basic Safety Instructions; Requirements For The Personnel; Designated Use - Endress+Hauser iTEMP TMT162 Bedienungsanleitung

Basic safety instructions

1.2.3 Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that
are permitted.
Forbidden
Procedures, processes or actions that
are forbidden.
Reference to documentation
Reference to graphic
Result of a step
1.3

Registered trademarks

HART®
Registered trademark of the HART® FieldComm Group
2 Basic safety instructions
2.1

Requirements for the personnel

The personnel must fulfill the following requirements for its tasks:
‣
Trained, qualified specialists must have a relevant qualification for this specific function
and task
‣
Are authorized by the plant owner/operator
‣
Are familiar with federal/national regulations
‣
Before beginning work, the specialist staff must have read and understood the instructions
in the Operating Instructions and supplementary documentation as well as in the
certificates (depending on the application)
‣
Following instructions and basic conditions
2.2

Designated use

The device is a universal and configurable temperature field transmitter with either one or
two temperature sensor inputs for resistance thermometers (RTD), thermocouples (TC) and
resistance and voltage transmitters. The unit is designed for mounting in the field.
The manufacturer is not liable for damage caused by improper or non-designated use.
28
Symbol Meaning
Preferred
Procedures, processes or actions that
are preferred.
Tip
Indicates additional information.
Reference to page
Series of steps
, , ...
Visual inspection
iTEMP TMT162
Endress+Hauser