Installation Of A Kitchen Furniture Panel; Mounting The Kitchen Furniture Panel Directly On The Unit - SystemAir SAVE VTR 150/B Betriebs- Und Wartungsanleitung

GB
Note:
Configuration of the Cooker Hood Function can be done only after the first power up of the SAVE VTR
150/B unit and competed startup wizard.
Configuration
1. Go to Service menu
2. Enter password (default 1111)
3. Go to Input menu. Select UNIVERSAL tab.
4. Select the universal input to which the cooker hood is connected. Example if it is connected to UI1 on the connection
board, then select UNIVERSAL INPUT 1. Set signal type as Digital input and select an option Cooker Hood
Function from the input type list.
Important
Make sure configuration is logged in the commissioning record!
6.4

Installation of a kitchen furniture panel

The kitchen furniture panel can be mounted directly on the unit, sides of cabinets or installed as a door. Parts for panel
installation directly on the unit and sides are delivered with the unit.
6.4.1

Mounting the kitchen furniture panel directly on the unit

Depending on the kitchen cupboard depth, the unit might have to be shifted forward for the panel to be aligned with
the cupboards.
212024 | A001
Fig. 18 Connection of the cooker hood
Fig. 19 Top view
23
Installation |